Works to Repair leaks in Pipes or Pool Structure

Pool Repair Putty is a hand-kneadable specialty epoxy that mixes in just one minute for permanent repairs to damp, wet areas and underwater surfaces. It will bond tenaciously to fiberglass, metal, wood, concrete, ceramic, glass, and most plastics including PVC. Hardening takes place in 20 to 30 minutes at which time Pool Repair Putty can be drilled, tapped, sanded, or painted. Pool Repair Putty contains a special fading dye that becomes fiberglass white after mixing and stays bright white even after exposure to U. V.

Application Directions:

Break or cutoff required potion of material.

Twist and knead in hands until uniform color is achieved. (Do not "over-knead" putty once a uniform color has been achieved as skin oils will reduce "tackiness".)

Force putty into any holes or cracks. For pipe repairs form a cuff that surrounds the entire pipe with putty.

Once in place do not overwork. Any movement will break bonds that begin to form immediately.

Useage:

Clean and roughen surface with sandpaper or file for best adhesion.

Pool Repair Putty can be drilled, filed, tapped, sanded, and machined after several minutes of hardening.

When applying putty underwater it may be helpful to use the polyethylene wrapper to keep putty from sticking to fingers.

Wash hands thoroughly with soap and water after use.

Not recommended for polyethylene or polypropylene plastics.

Physical Properties

Working Life: 20 - 30 Min.

Shelf Life: 1 year + in container

Shore D Hardness: 65-70

Tensile Strength: 6,000 PSI

Maximum Use Temp.: 250° F

Shrinkage: less than 1%

Electrical Res.: 30K megaohms

Dielectric Str.: 12 kv/mm @ 3mm

Warranty Coverage: Anderson Manufacturing Plumbings & Fittings come with a 30 Day Limited Manufacturers Warranty. The manufacturer warrants their plumbings & fittings against defects on workmanship and materials. This warranty will be void if the plumbing/fitting is damaged as a result of improper installation or use, or if damage is a result of ice. Warranty does not cover any labour charges, cost of lost water or chemicals, or any other damages that may occur.

Start a Warranty Claim:To begin a claim please email [email protected] with a photo showing the defect(s)/damage to your Anderson Manufacturing Plumbing/Fitting and include a brief explanation of what occurred.