28 inch Solar Dome Swimming Pool Heater

With the above ground swimming pool solar heater you can enjoy solar heated pool water long after summer has ended. With use of the solar panels, your pool water temperature can be raised as much as 15 degrees. Cold pool water is circulated through the solar panels and is returned to the pool warmed through a return hose. The Above Ground Pool Solar Heater is a cost-effective, eco-friendly way to heat your pool! This solar heater works by connecting between your filter pump and pool return to properly heat your pool. Being compatible with most above ground pools, it uses the system you're already using to install easily and quickly, letting you enjoy your pool more.

Features/Benefits:

• Compatible with your existing pool pump
• Better than a gas heater - no gas line-no gas bills-no pollution
• One unit effectively heats 15 ft.-18 ft. pool sizes
• Superior water-flow design
• Extends swimming season
• Heat your pool up to 10 degrees warmer
• Easy to install

This solar heater has a 28 x 28 inch total diagonal foot print.

The horizontal and vertical measurement is 20 x 20 inches.

Includes a 1 Year Manufacturer's Warranty.

To complete the installation of this solar heater, you will require these additional components depending on your pool set up

40 mm Installation (Multiple Panels):

• 1 x 3 Way Valve
• 1 x 3 Way Threaded Tee
• 2 x 40mm Hose Connectors
• 2 x 40 mm Hose Sections

32 mm Installation (Multiple Panels):

• 1 x 3 Way Valve
• 1 x 3 Way Threaded Tee
• 2 x 1.5" to 32mm Connectors
• 2 x 32 mm Hose Sections

Standard 1.5" Barb Installation (Multiple Panels):

• 1 x 3 Way Valve
• 1 x 3 Way Barbed Tee
• 2 Sections of Standard 1.5" Hose (length of hose cut to fit)
• 3 x Dura Fitting 1436-015 (1.5" Male Threaded x Barb Fitting)

Standard 1.5" Glue Installation (Multiple Panels):

• 1 x 3 Way Valve
• 1 x 3 Way Non-Threaded Tee
• 2 Sections of Standard 1.5" Hose (length of hose cut to fit)

------------------------------------------------------------------------------------

40 mm Installation (Single Panel):

• 1 x 40mm Hose Connectors
• 1 x 40 mm Hose Sections

32 mm Installation (Single Panel):

• 1 x 1.5" to 32mm Connectors
• 1 x 32 mm Hose Sections

Standard 1.5" Barb Installation (Single Panel):

• Standard 1.5" Hose (lengths of hose cut to fit)
• 2 or 4 x Dura Fitting 1436-015 (1.5" Male Threaded x Barb Fitting)

*** Quantity depends on desired installation ***

Standard 1.5" Glue Installation (Single Panel):

• Standard 1.5" Hose (lengths of hose cut to fit)
  *** Quantity depends on desired installation ***